I'm beginning to think maybe I'll just never be a mesh guy generally. I got my ORF Nexmesh in the mail, along with a pack of Wotofo's cotton for it. I wanted no lingering questions about my wicking maybe being my problem. The cotton that came with the rda was almost impossible to fit in the deck with the provided mesh strip. That's why I did my own, which was better, but still burned.
I have the nexmesh installed perfectly straight (I quadruple checked) using the tool provided and this specimen of the woto cotton was still super tight, but did go in, so I didn't need to mount the mesh strip one side at a time. Glowed fine.
I SOAKED this thing down. as in visible pools on top of the build and let it sit for a few minutes and repeat until juice was just about running through the airflow holes after sitting. All this after a good prime too btw.
Started at 50 watts and of course, no matter what they say, all cotton needs to break in. At least in my limited experience.
First hit, medium vapor production and new cotton taste. Let it sit for maybe 60 or 90 seconds.
Very next hit started to burn toward the end.
Sqounked some more until I could see juice seeping through the cotton under the mesh, same thing. 60 watts was immediate burning and now there is browning on the cotton.
I dunno.I like 3 to 5 second hard, high warm to hot pulls and I'm just thinking that mesh is simply not capable of that. Yes, I saw Grimm Green's video. Even he said though that he still prefers regular coils in it.
I pick up my Pulse dual with the Pulse 2 and I get 5 or 6 yummy juicy hits and then the flavor starts to gradually fade. Squonk it again were off for 5 or 6 more really good hits. With the Profile I'm sitting here with my eyes closed as I hit it, wondering how soon the burning will start this time.
I personally am NOT getting this rda. Am I the only one?
I have the nexmesh installed perfectly straight (I quadruple checked) using the tool provided and this specimen of the woto cotton was still super tight, but did go in, so I didn't need to mount the mesh strip one side at a time. Glowed fine.
I SOAKED this thing down. as in visible pools on top of the build and let it sit for a few minutes and repeat until juice was just about running through the airflow holes after sitting. All this after a good prime too btw.
Started at 50 watts and of course, no matter what they say, all cotton needs to break in. At least in my limited experience.
First hit, medium vapor production and new cotton taste. Let it sit for maybe 60 or 90 seconds.
Very next hit started to burn toward the end.
Sqounked some more until I could see juice seeping through the cotton under the mesh, same thing. 60 watts was immediate burning and now there is browning on the cotton.
I dunno.I like 3 to 5 second hard, high warm to hot pulls and I'm just thinking that mesh is simply not capable of that. Yes, I saw Grimm Green's video. Even he said though that he still prefers regular coils in it.
I pick up my Pulse dual with the Pulse 2 and I get 5 or 6 yummy juicy hits and then the flavor starts to gradually fade. Squonk it again were off for 5 or 6 more really good hits. With the Profile I'm sitting here with my eyes closed as I hit it, wondering how soon the burning will start this time.
I personally am NOT getting this rda. Am I the only one?