Wotofo Serpent Elevate

[Letitia9]

Hi. I have tried many times, try more and with less cotton, different coils, but when I close the lid it generates pressure and floods the deck. What I can do? I apologize, my desepero made me enter to forums of other countries and I am using google translator.

Welcome to VU.
You might be over filling, some of the bubble tanks do better with a larger air bubble. Helps to not have the cap open for long and fill slowly if using max vg. I'd that doesn’t work you'll just have play around with the wicking.

 

[ajvapes]

Be careful of overfilling, I have also found that some cotton wicks too well and have stopped combing out the cotton. Also let the the tank sit for a minute before screwing on the top..

 

[f1r3b1rd]

Sometimes it also helps took flip it upside down to tighten the top cap.
Start screwing it on, flip it, tighten it ..

 

[ajvapes]

Sometimes it also helps took flip it upside down to tighten the top cap.
Start screwing it on, flip it, tighten it ..

Similar cap problem with the gear, if I let sit a bit and slowly tighten cap it does not flood.

 

[f1r3b1rd]

Similar cap problem with the gear, if I let sit a bit and slowly tighten cap it does not flood.

A lot of times that’s the air pressure forcing juice in the chamber. Try flipping it, it’ll force air instead of juice. Obviously overfilling is overfilling and you can only fit so much fluid in any vessel. But, if you leave a small bubble and flip, you should be good to go.

 

[garrafa14]

Be careful of overfilling, I have also found that some cotton wicks too well and have stopped combing out the cotton. Also let the the tank sit for a minute before screwing on the top..

 

[garrafa14]

guys, seriously, really thank you ... as they told me, the tank should not fill it completely, that was the trick.

 

[f1r3b1rd]

guys, seriously, really thank you ... as they told me, the tank should not fill it completely, that was the trick.

Glad you got it worked out!