Become a Patron!

Seen the new Fatality RTA ?

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
4 airflows :p for single coil that guy said it can fit 7mm wow that’s large.
No doubt. I wonder how a smaller single, like 4id, would be considering the af adjustments. Still airy probably. I'm kinda jonesing on it for dual coil but my 100+ trigger is pretty hard to pull for a tank.
 

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
Decided to rob the change jar to get this RTA. That way I won't miss the money? :rolleyes: Anywho, that's how I'm going to justify getting it without real reviews :sneaka:
Haven't decided color.
The 1 and only mod that I'll have to fit it(at least for now) is gunmetal and black, so I'm thinking black, but like the ss too. They both come with clear and polished ultum tips and tank.
What do you think?
 
Last edited:

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
I’d say stick with whichever suits the mod better or (future mod colour your gonna buy)
Yeah, just don't know yet if I want that much black, not concerned of paint on chimney. But ss looks pretty good on black, dark colored mods too :huh:
Which do you think looks best with black/gunmetal?

I was going to add a poll but didn't figure out how to do it.
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Have you got a a Black (similar coating) and SS atty now? Try one of each and see what look best with the colours hehe

Thing is if you choose the black tank and it’s a shade difference to the mod that can look off
 

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
And the mod will be 2 shades of black so with black atty, 3 shades. Hadn't thought about that. Still may look okay, but now I'm leaning towards SS since that would seem to go with most
 

CrazyChef v2.0

Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Finally came in today! :D

This thing is definitely worth every penny - and the wait! Serious flavor AND clouds outta this thing.

PHjz8g5.jpg

4A5aiht.jpg

QMHa8IC.jpg

ENIbX3a.jpg
 

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
Finally came in today! :D

This thing is definitely worth every penny - and the wait! Serious flavor AND clouds outta this thing.

PHjz8g5.jpg

4A5aiht.jpg

QMHa8IC.jpg

ENIbX3a.jpg
Cool. Mine will be here Tues. Middle of the week dammit. :) I got SS too and glad I did after seeing some picks from QP on twitter, or somewhere like that. I wish the inside of the ultem tanks were polished.
 
Last edited:

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
Same here. Don't get too excited about the bubble portion - it seems like pretty cheap plastic.
Yeah, I saw that too, and ur right. I liked QP's photos of the SS with ultem tank/tip and figured that'd look really good on my glossy black Creator. Maybe not so much with a frosty look. If they were going to add a bubble, def should have been glass.
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
I just can't figure out why they'd choose that for a name. Are they angling for the "so stupid I stick my mod in my pocket and let it autofire" award? :facepalm:

Andria
 

CrazyChef v2.0

Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Mine should be here Tuesday. Opted for the black as it was the only colour the UK stockist had.

I haven' been this excited for vape mail in a long long time. Im really hoping that it doesn't let me down like most vaping stuff I buy.

I fell in love as soon as I saw it, it seems like a Drop RDA in RTA form and I LOVE my drop. My main setup is a DNA Boxer and my Drop, but I'm fed up of dripping.

As long as this is at east on par with the aromamizer plus in terms of flavour il be happy, but I was told the flavour us pretty close to RDA level. How true is this?
 

CrazyChef v2.0

Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Should've taken pics but I was too excited to try this. Put a pair of series fused Claptons in the Fatality - it's hitting like a beast and the flavor is beyond outstanding! The coils are a pair of 2x26/36, 3.5mm inside diameter, 9/10 wraps. Resistance comes out right at 0.40Ω. Running it on a stacked Overpowered tube.
 

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
Just got it cleaned up and built tonight. Only thing I have right now (without going lower) is SS 3x30/38 , wrapped it on 4mm ID and 7 wraps, .31Ω
Being very flavorful as is, I can already tell that when I get it fine tuned it's going to be flavor galore.
20180521_201707.jpg
 
Last edited:

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
Really liking the independent bottom/side quad AF control. Oh! You want the AF like that? No Problem :inlove:

And no threading ! 1/4 turn and the tank pops off the deck, and has ss around the base of the tank to hold the juice in when not attached, juice only goes through the flow holes when open. And the top fill cap is 1/4 turn or less. Love the thread-less features. No fiddling, it just works.

No leaking, even after filling since it has JFC. Haven't seen a drop outside the atty or on the mod since I been using it.

I thought the tip was going to be a proprietary size because I asked Phil over at QP and he conveyed yes,,, but it's 810 ! ! Yaa !

Of the 5 tanks, I've only used the 2ml shorty mode. I don't take it to work so 2ml is fine esp since it's so easy to fill. I'll be trying the other tanks soon, and the outside of the ultem's are polished and once juiced the inside will look clearer. I've seen pics of it with the 6ml bubble and atm can't say that I like it - it's plastic so juice type limiting. But for me[at least so far], this isn't a run around town all day atty/setup, where it can get beat up or worse, so I don't need it to hold that much juice.

The deck is spacious and can fit many wraps depending on wire size, if that's want you want. I took some measurement before the first build but didn't log it. Will next time. The hole for the leads are big for large builds and the flat head screws are big and fill the holes so if using smaller wire it makes solid contact and doesn't twist the leg, and buttery threads. I've ran 4id/7wrap duals, and a single 4.7id /6wrap. Only SS so far, as I don't have any other wire and the premade coils I have of other metal are not for this tank! So I'll be shopping for wire, or coils.

EDIT: The machining is very good. Inside the chimney has a nice dome and very smooth.
The resistance for AF rings and twist locks is spot on. The bottom af ring on mine is more restricted than the top but still easy enough to not unscrew the atty. Probably supposed to be like that so when you adjust the top ring you don't accidentally move the bottom?
Wicks very well and super easy from the 1st. Just tuft it into the top of the ports and that's it.

Pics in a day or 2~

Best flavor tank I own, even without the coils being my optimal.:hearts::bliss::stars2:
 
Last edited:

Heartsdelight

VU Donator
Diamond Contributor
Member For 5 Years
Really liking the independent bottom/side quad AF control. Oh! You want the AF like that? No Problem :inlove:

And no threading ! 1/4 turn and the tank pops off the deck, and has ss around the base of the tank to hold the juice in when not attached, juice only goes through the flow holes when open. And the top fill cap is 1/4 turn or less. Love the thread-less features. No fiddling, it just works.

No leaking, even after filling since it has JFC. Haven't seen a drop outside the atty or on the mod since I been using it.

I thought the tip was going to be a proprietary size because I asked Phil over at QP and he conveyed yes,,, but it's 810 ! ! Yaa !

Of the 5 tanks, I've only used the 2ml shorty mode. I don't take it to work so 2ml is fine esp since it's so easy to fill. I'll be trying the other tanks soon, and the outside of the ultem's are polished and once juiced the inside will look clearer. I've seen pics of it with the 6ml bubble and atm can't say that I like it - it's plastic so juice type limiting. But for me[at least so far], this isn't a run around town all day atty/setup, where it can get beat up or worse, so I don't need it to hold that much juice.

The deck is spacious and can fit many wraps depending on wire size, if that's want you want. I took some measurement before the first build but didn't log it. Will next time. The hole for the leads are big for large builds and the flat head screws are big and fill the holes so if using smaller wire it makes solid contact and doesn't twist the leg, and buttery threads. I've ran 4id/7wrap duals, and a single 4.7id /6wrap. Only SS so far, as I don't have any other wire and the premade coils I have of other metal are not for this tank! So I'll be shopping for wire, or coils.

Best flavor tank I own, even without the coils being my optimal.:hearts::bliss::stars2:
So happy for you that it’s everything you hoped for.

Is it a very airy vape? Or is it controllable with the quad af? Did it work well with the 4.7mm id single coil?
 

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
So happy for you that it’s everything you hoped for.

Is it a very airy vape? Or is it controllable with the quad af? Did it work well with the 4.7mm id single coil?
Thank You :hug:

Yes it's airy. Can't imagine running af wide open, but I suppose with the right build and enough power...Of course with less af you can get a restricted draw, very restricted if turn basically all the way down. So there's room for adjusting to preference. This peticular 4.7id ss2x24/32 works well for the af, but the wire wouldn't be hard to beat. It's basically all I have on hand for testing with larger id/single.

My immediate goal is deciding on what coils for dual mode. I want faster ramp up than ^ what ^ I've had in it so perhaps someone could suggest something besides a basic clapton at about .3 resistance ? I don't build wire so it would have to be premade coils or lengths, or on a spool.
 
Last edited:

Heartsdelight

VU Donator
Diamond Contributor
Member For 5 Years
Thank You :hug:

Yes it's airy. Can't imagine running af wide open, but I suppose with the right build and enough power...Of course with less af you can get a restricted draw, very restricted if turn basically all the way down. So there's room for adjusting to preference. This peticular 4.7id ss2x24x32 works well for the af, but the wire wouldn't be hard to beat. It's basically all I have on hand for testing with larger id/single.

My immediate goal is deciding on what coils for dual mode. I want faster ramp up than ^ what ^ I've had in it so perhaps someone could suggest something besides a basic clapton at about .3 resistance ? I don't build wire so it would have to be premade coils or lengths, or on a spool.
For me Ni80 coils ramp up fast.

Lightning Vapes Fused Clapton 26*2 Ni80/36 Ni80 3mm i.d. 5 wraps .30 ohms, single coil.

But I’m sure the more experienced amongst us will pipe in :D
 

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
For me Ni80 coils ramp up fast.
I wound up getting (next week) some sticks. Some N80 and some SS mixed in for a target resistance. 2x.3SS / N80 frames / SSwrap. Only 2 ribbons but I tried quite a while wrestling with wire wizard with more ribbons/more N80 and that's as many as I could come up with to get to .26-.28. At least it will be flexible in id and wrap# while staying close to that range.
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
This tank is on my Christmas wish list ...I write it pretty early :giggle:

You digging the Fraliens meg made Vape fan?
 

jwill

The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
I like my Modfathers.
How does this tank beat them out in your opinion?

In flavor, air control and build options. I love the excellent flavor reproduction and satisfactory vapor production of the Modfather. It has always been top notch in my opinion. Very well built and very consistent, without much hassle. I am travelling right now and carrying two of them with 1 piece of spare glass and they are nearly bullet proof. I do adore them.

The fatality is all of that but with more build options, juice flow control and better airflow micromanagment. You can go from chasing flavor to chasing clouds with the twist of a couple of airflow rings. In the hands of an experienced person one could pit this RTA against the vapor production of most revered RDA's. You can adjust literally every part of the fatality and can dial it in almost microscopically to whatever style of vaping makes you happy. As an added bonus It also fits without overhang on more of my mods due to the slightly smaller diameter of it.

I am a big fan of RTA's and this one is the best one so far that I have had my hands on. I plan to buy another one soon and I have two Juggerknots in my mailbox, maybe they will be better but as it stands right now. This is king IMO.
 

Pastorfuzz

Gold Contributor
Member For 4 Years
VU Patreon
In flavor, air control and build options. I love the excellent flavor reproduction and satisfactory vapor production of the Modfather. It has always been top notch in my opinion. Very well built and very consistent, without much hassle. I am travelling right now and carrying two of them with 1 piece of spare glass and they are nearly bullet proof. I do adore them.

The fatality is all of that but with more build options, juice flow control and better airflow micromanagment. You can go from chasing flavor to chasing clouds with the twist of a couple of airflow rings. In the hands of an experienced person one could pit this RTA against the vapor production of most revered RDA's. You can adjust literally every part of the fatality and can dial it in almost microscopically to whatever style of vaping makes you happy. As an added bonus It also fits without overhang on more of my mods due to the slightly smaller diameter of it.

I am a big fan of RTA's and this one is the best one so far that I have had my hands on. I plan to buy another one soon and I have two Juggerknots in my mailbox, maybe they will be better but as it stands right now. This is king IMO.
Thanks for the info.
28mm would be nice. I don't have many mods the Modfathers look good on.
Thanks for making me spend more money! HAHA
 

jwill

The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
Thanks for the info.
28mm would be nice. I don't have many mods the Modfathers look good on.
Thanks for making me spend more money! HAHA

This truly is one of those must haves if you like RTA's. I have always been able to find something to bitch about with every RTA, but not this one.
 

Pastorfuzz

Gold Contributor
Member For 4 Years
VU Patreon
This truly is one of those must haves if you like RTA's. I have always been able to find something to bitch about with every RTA, but not this one.
I like RTA's for sure.
I just grabbed some VCMT 25mm RTA's on the cheap from CJ Vapor a few weeks ago.
$15 each. (sold out now)
Those things pack some flavor. I was very surprised.
Thanks again for the info!
 

VU Sponsors

Top