Become a Patron!

Your Vape Today? Mod, rba, juice, etc

CrazyChef v2.0

Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Forgot how much I love this Cookie Monsta juice

sqLXtgg.jpg
 

ScReWbALL

Silver Contributor
Member For 4 Years
Got my Driptech-DS and the accompanying Goon 1.5 Clones in from FastTech. Threw a couple triple core 26/36 N80 Aliens on it and vaping a Peach, Strawberry, Pineapple juice I mixed up earlier.
e93c688a2b38a8474fffd0ea442afaa0.jpg
a14fa496b1556406da5a88b419c78a0b.jpg



You're not drinking water are you?! You realize that stuff is found in antifreeze!?!
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Reload RTA on the Double Barrel. SS316L aliens vaping that1vapes strawberry custard.
0e3339dc25363d7d4c24baf14463000a.jpg



Sent from my iPhone using Tapatalk


Good taste, my man. Had I more money this summers(when I drooled over that mod and tank), I would have that exact setup, strawberry custard and all.

Instead I have Eleaf Invoke, Pyro styled RDTA, and DIY Banana Custard with 0.16 ohm kanthal aliens
 

CashNVape

Gold Contributor
Member For 4 Years
Hitting the Smoant and the Limitless.....
1d35aebf66b834e5b86ce656243f6c82.jpg


Sent from my Z981 using Tapatalk
Yomanny hows the orange juice from the sauce? Tempted to order a bottle but dont want to have it be another nasty flavour. I never actually tried a orange flavoured juice before.

Sent from my SM-G920V using Tapatalk
 

fozzy71

Silver Contributor
Member For 4 Years
Been using the pulse kit since I got it Friday. Vaping blue razz sour patch on @ScReWbALL aliens at .12 ohms.
0b136e12298980550ff716fbf57507f2.jpg
db01455cde1f4c9051ec307e868922d0.jpg


Sent from my SM-G950U using Tapatalk

Great minds vape alike:

Got my pulse out this morning, along side some cold brew caramel truffle coffee, with a Dead Rabbit 24 (aluminum clone) rocking a single coil Tri-Core Fused Clapton Ni80 0.21 ohm 3mm 3-26/36 from coilology (until my new AVS SS coils arive) and some DIY Bust A Coffee Nut I made back in November using mostly RF SC's. Delicious.

 

skt239

VU Donator
Platinum Contributor
Member For 4 Years
Great minds vape alike:

Got my pulse out this morning, along side some cold brew caramel truffle coffee, with a Dead Rabbit 24 (aluminum clone) rocking a single coil Tri-Core Fused Clapton Ni80 0.21 ohm 3mm 3-26/36 from coilology (until my new AVS SS coils arive) and some DIY Bust A Coffee Nut I made back in November using mostly RF SC's. Delicious.


Great looking set up
 

stanglifemike

Silver Contributor
Member For 2 Years
Cool looking MOD @CashNVape is that Carbon Fiber?
That's the SX Mini G Class. Yes, they do use real carbon fiber in them, but that isn't the carbon fiber model. The model pictured is black Kevlar, which is also real. The G Class is an awesome mod, probably my favorite to use.

Here's a link to the G Class. The mod in this thread you asked about is photo 7 on VaporDNA, and the carbon fiber model is photo 11.
https://www.vapordna.com/YiHi-SXMini-G-Class-SX550J-200W-Box-Mod-p/sxmgcl.htm

Sent from my SM-N950U using Tapatalk
 
Last edited:

skt239

VU Donator
Platinum Contributor
Member For 4 Years
That's the SX Mini G Class. Yes, they do use real carbon fiber in them, but that isn't the carbon fiber model. The model pictured is black Kevlar, which is also real. The G Class is an awesome mod, probably my favorite to use.

Here's a link to the G Class. The mod in this thread you asked about is photo 7 on VaporDNA, and the carbon fiber model is photo 11.
https://www.vapordna.com/YiHi-SXMini-G-Class-SX550J-200W-Box-Mod-p/sxmgcl.htm

Sent from my SM-N950U using Tapatalk

It’s a badass mod. Even though it’s not my style I’ve always wanted one.
 

CashNVape

Gold Contributor
Member For 4 Years
It’s a badass mod. Even though it’s not my style I’ve always wanted one.
My style for a long ass time has been mech mods but I decided to spend a little money and try out the g class. Its def a looker snd performer! Yes mine is the kevlar model and it is real. Im waiting for my aliens to arrive from @b_d_builders so I can stick my modfather rda on this mod

Sent from my SM-G920V using Tapatalk
 

skt239

VU Donator
Platinum Contributor
Member For 4 Years
My style for a long ass time has been mech mods but I decided to spend a little money and try out the g class. Its def a looker snd performer! Yes mine is the kevlar model and it is real. Im waiting for my aliens to arrive from @b_d_builders so I can stick my modfather rda on this mod

Sent from my SM-G920V using Tapatalk

Yeah I’m a single 18650 guy for the most part. However I still use a duel 18650 with my goon and petri so the G class isn’t out of the realm of possibility for me.
 

stanglifemike

Silver Contributor
Member For 2 Years
My style for a long ass time has been mech mods but I decided to spend a little money and try out the g class. Its def a looker snd performer! Yes mine is the kevlar model and it is real. Im waiting for my aliens to arrive from @b_d_builders so I can stick my modfather rda on this mod

Sent from my SM-G920V using Tapatalk
A looker, no doubt. I fell in love with it as soon as I saw it! I did some research on it and decided I had to have it. It's the most I've spent on a mod, but worth every penny. The carbon fiber model was the first I saw and what I planned to buy, but then I saw the black Kevlar and knew it was the one for me.

Sent from my SM-N950U using Tapatalk
 

CrazyChef v2.0

Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
nice to see someone else still rocking an istick 200. I got 2 of them but one quit working because of battery door flex. I think I could make it work if I taped the door shut tight each time I changed batteries but I sure aint gonna be vaping a mod with duct tape holding the battery door closed. :D
Best $15 I ever spent!
 

fozzy71

Silver Contributor
Member For 4 Years
Was building my black bonza for my silver athena and decided to walk to the shop to see if they might have a squonk box to match better. Came home with a pulse kit for $51 out the door, no regrets. Coilology tri-core fused clapton 3-26/36 ni80 single coil ~0.21 ohm (VTC5A) and some DIY TOC's Cookie Lover recipe I adapted. Good vape and I haven't even finished breaking in the rayon yet. Sitting next to my first pulse and DR 24 clone with the same build (ijoy 20700) and a variant of Bust A Coffee Nut.

 

stanglifemike

Silver Contributor
Member For 2 Years
Was building my black bonza for my silver athena and decided to walk to the shop to see if they might have a squonk box to match better. Came home with a pulse kit for $51 out the door, no regrets. Coilology tri-core fused clapton 3-26/36 ni80 single coil ~0.21 ohm (VTC5A) and some DIY TOC's Cookie Lover recipe I adapted. Good vape and I haven't even finished breaking in the rayon yet. Sitting next to my first pulse and DR 24 clone with the same build (ijoy 20700) and a variant of Bust A Coffee Nut.

Where did you get that Dead Rabbit and who makes it? How does it compare to the authentic?

Sent from my SM-N950U using Tapatalk
 
Last edited:

CashNVape

Gold Contributor
Member For 4 Years
Was building my black bonza for my silver athena and decided to walk to the shop to see if they might have a squonk box to match better. Came home with a pulse kit for $51 out the door, no regrets. Coilology tri-core fused clapton 3-26/36 ni80 single coil ~0.21 ohm (VTC5A) and some DIY TOC's Cookie Lover recipe I adapted. Good vape and I haven't even finished breaking in the rayon yet. Sitting next to my first pulse and DR 24 clone with the same build (ijoy 20700) and a variant of Bust A Coffee Nut.

Score, man.
Looking good

Sent from my SM-G920V using Tapatalk
 

fozzy71

Silver Contributor
Member For 4 Years
Where did you get that Dead Rabbit and who makes it? How does it compare to the authentic?

Sent from my SM-N950U using Tapatalk
I got it at local brick and mortar for $15 - 20% off on their Wednesday sales. I have no idea who makes it as it had no type of maker's identification. It came in a cheap little zippered pouch thing, no cardboard packaging. I don't have an authentic to compare it to.
 

stanglifemike

Silver Contributor
Member For 2 Years
I got it at local brick and mortar for $15 - 20% off on their Wednesday sales. I have no idea who makes it as it had no type of maker's identification. It came in a cheap little zippered pouch thing, no cardboard packaging. I don't have an authentic to compare it to.

That's cool. Was hoping you had an authentic to compare flavor. I'm guessing the deck setup looks the same, but is the airflow in the top cap angled? How do you like it?

Sent from my SM-N950U using Tapatalk
 
Last edited:

fozzy71

Silver Contributor
Member For 4 Years
That's cool. Was hoping you had an authentic to compare flavor. I'm guessing the deck setup looks the same, but is the airflow in the top cap angled? How do you like it?

Sent from my SM-N950U using Tapatalk
It is angled but it doesn't look like the top cap cuts it off/down as far as the authentic from what I see in pics. I did just get an authentic DR SQ (22) and got it built and that top cap airflow seems to go farther down than the clone 24 as well.

0.3 ohm framed staple ni80 build from coilology on the athena with vtc5a and it is a tasty vape.

edit to add: the 22 warms my cheeks a lot more when I purge so I don't think the 24 clone is angled much, if any, or it is because the top cap is cut higher so the air goes out to the sides more instead of angled up at my cheeks.





 

stanglifemike

Silver Contributor
Member For 2 Years
@fozzy71 Nice to see that you also leave your coils high on the DR. I've seen multiple people put their coils right on top of the posts. I tell them they'll get better flavor if they'll leave them taller so they're closer to the air slots, but they say they like it better when they're down low. I don't know if it's just their building habits or what, but I know it can't be based on flavor. I've tried placing coils everywhere in the DR, and flavor is much MUCH better everytime I leave them tall.

Sent from my SM-N950U using Tapatalk
 

stanglifemike

Silver Contributor
Member For 2 Years
Lol had to see just how big a 20ml tank looks. Hmmmm
ed29ad24bad2c9b0c4328df87d0c76e2.jpg


Sent from my SM-G920V using Tapatalk
Wow, that looks ridiculous! I was thinking about getting the Aromamizer back when I got the G Class. I didn't think I'd run it unless it was is in the shortest tank configuration, though, so I decided to hold off

Just got this Aromamizer plus
ddd877c3b3446c815e834ece6502f167.jpg


Sent from my SM-G920V using Tapatalk
I like it that way too

Sent from my SM-N950U using Tapatalk
 

ChainVapeS

Gold Contributor
Member For 4 Years
Pulse bf kit, with dual staples running .15 ohms, with sunrise surprise juice, strawberry apple mango cream.
306ddec5bb0f39c7c759589eace5a109.jpg


Sent from my SM-N950U using Tapatalk
 

St.Roostifer

Gold Contributor
Member For 5 Years
I don't have the juice with me but don't need it with as much as the JC holds. Rocking some 3mg Naked berry belts on some cheap dual coil UD's at 52W. It's my least likeable tank and mod I call it the misfit. Does the job so I can't complain.
 

Attachments

  • IMAG0081.jpg
    IMAG0081.jpg
    574.7 KB · Views: 19

VU Sponsors

Top