Become a Patron!

Squonkers are Bonkers

skt239

VU Donator
Platinum Contributor
Member For 4 Years
Haaa.. not me mate. If you here "Oi!" it might be though.. I was there in 86 & 87, a young punk skate rat. It was a very California troubled-youth thing to go see the Dead!
Saw them again around '88 at Shoreline, saw Pink Floyd that same year I think.. Momentary Lapse of Reason tour
; ))

I saw them in the 90's twice at the cap center in MD and twice at rkf in DC. Never got to see the OG lineup of floyd but have seen Roger Waters a few times. Great memories... well from what I can remember :)
 

~Don~

Platinum Contributor
Member For 5 Years
Ok guys and gals, 1st world problem here. I am considering buying one of the following.from the classifieds, 1st up is the Molly with upgraded silver contacts and a clear and green door with matching buttons. The 2nd item is a Bolt 2.5 in beautiful purple with a stabwood door and matching button.

Any comments or things I should know about either mod?

I am leaning towards the purple Bolt, that purple with a stabwood door it makes me think of the Grateful Dead (best concert I ever saw and probably ever will see!!!)

I'd pass on them myself.

There is the Mölly V2 out for less, there is the Bolt V3 for less.

Mods just like cars lose value regardless of "upgrades" unless they a rarity, which the Mölly V1.1 and V1.2 aren't nor a Bolt 2.5


Sent from my iPhone using Tapatalk
 

BrewBear

Platinum Contributor
Member For 4 Years
Top o' the morning bonkers. Question, didn't lost vape make a therion with the standard DNA 75 chip and not the 75c?
Yes, they did! I have two of them in daily use along with a couple of 75C. The 75C is supposed to get a firmware upgrade sometime after CNY, if you're using the international version of Escribe.
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
Yes, they did! I have two of them in daily use along with a couple of 75C. The 75C is supposed to get a firmware upgrade sometime after CNY, if you're using the international version of Escribe.
Umm why would CNY have anything to do with Evolv?
They moved stuff to China now?
 

BrewBear

Platinum Contributor
Member For 4 Years
Umm why would CNY have anything to do with Evolv?
They moved stuff to China now?
I don't think they did, not yet???? I saw an interview with Brandon (?) and DJPsb and they're talking about the new chip. They (Evolve) already shipped a bunch of chips to the manufacturers, but all new mods and such will be released after CNY. They are timing the release of the new firmware with the release of the new mods. They will be releasing some limited edition Evolve mods too!
 

jasonandsarah

Gold Contributor
Member For 3 Years
I'd pass on them myself.

There is the Mölly V2 out for less, there is the Bolt V3 for less.

Mods just like cars lose value regardless of "upgrades" unless they a rarity, which the Mölly V1.1 and V1.2 aren't nor a Bolt 2.5


Sent from my iPhone using Tapatalk

Unless your also considering the extra money you'll spend to get those upgrades. I mean yeah you can get a v2 Mölly for 10$ less but it'll have 1 set of doors, 1 button and copper contacts. Silver contacts alone will run you what 50$-60$? Then 40$ a set of door and button. So your saving a good chunk of change and getting a better performing mod imo. So if you want those extras or plan to add them I think it's a good deal.
I sold my v1 molly with a stabwood door recently and got $250 out of it. I kinda regret letting it go to be honest.
I agree the purple bolts are awesome looking but as already stated it's a bad time for resale value on those.

Sent from my SM-G955U using Tapatalk
 

troydestroy

Silver Contributor
Member For 4 Years
Trying to unload 1 or 2 S21 mods in classifieds. Need room for incoming mods/builds...
256b75f1ba8c02e5749bb7b9384ec5e6.jpg
 

troydestroy

Silver Contributor
Member For 4 Years
What happen to vt and his little group buy did he put us in a randomizer and we missed the list

Sent from my SM-G950U using Tapatalk
I'm talking with broscience about getting the things i need (monster bottles and silver contacts)... They might get some more items on their next shipment...
 

~Don~

Platinum Contributor
Member For 5 Years
I'll be ordering the Silver MM510 Kit from Broscience...and grabbing some .999 Silver sheet off amazon ( Convert the Neo from Silver Plate to Silver ) and use the Plated contacts in the Molly.

Maybe Eeek out another .05 Voltage on the Neo ;)
 

BrewBear

Platinum Contributor
Member For 4 Years
I'll be ordering the Silver MM510 Kit from Broscience...and grabbing some .999 Silver sheet off amazon ( Convert the Neo from Silver Plate to Silver ) and use the Plated contacts in the Molly.

Maybe Eeek out another .05 Voltage on the Neo ;)
I prefer getting fine silver from Rio Grande Jewelry. They are a reputable place, besides you can choose the size and thickness you want. https://www.riogrande.com/category/metals/silver/999-fine-silver
 

jasonandsarah

Gold Contributor
Member For 3 Years
So after some more bugging on my part I got Raphaël to send me a email that says he's arranged for a package pick up the 19th. Hopefully he follows through this time.

Sent from my SM-G955U using Tapatalk
 

~Don~

Platinum Contributor
Member For 5 Years
Oh man, wtf am I doing to myself today? Lol

ad8df8264944648a4062322282ee2c2c.jpg


Yes I was rummaging through my drawer and found the RTA...coiled and wicked it and loaded the TC profile...

Way to much air on that rta, have it just about shut

I'll finish the tank and promptly clean and stow it...

Boredom I tell ya


Sent from my iPhone using Tapatalk
 

jasonandsarah

Gold Contributor
Member For 3 Years
I would of PM'd him and been like... Yo Butternuts... the Mojo is 159 the NeoFet is 179...pay ya the difference, send me a NeoFet lol
I wish I was that kinda guy. I feel like he's gonna take anything I say the wrong way.

Sent from my SM-G955U using Tapatalk
 

derrickfosgate

Gold Contributor
Member For 4 Years
Oh man, wtf am I doing to myself today? Lol

ad8df8264944648a4062322282ee2c2c.jpg


Yes I was rummaging through my drawer and found the RTA...coiled and wicked it and loaded the TC profile...

Way to much air on that rta, have it just about shut

I'll finish the tank and promptly clean and stow it...

Boredom I tell ya


Sent from my iPhone using Tapatalk
Did u see my post yesterday i did the same thing weird a

Sent from my SM-G950U using Tapatalk
 

derrickfosgate

Gold Contributor
Member For 4 Years
Oh man, wtf am I doing to myself today? Lol

ad8df8264944648a4062322282ee2c2c.jpg


Yes I was rummaging through my drawer and found the RTA...coiled and wicked it and loaded the TC profile...

Way to much air on that rta, have it just about shut

I'll finish the tank and promptly clean and stow it...

Boredom I tell ya


Sent from my iPhone using Tapatalk
I want another aeromizer for shits and giggles

Sent from my SM-G950U using Tapatalk
 

~Don~

Platinum Contributor
Member For 5 Years
dang 85w...If I recall the settings I had for TC... 70w 1 second punch 35w 460f... I only had simple Round SS316L build going on... ooh which reminds me... before I forget...need to set it back to watt mode lol

I can see me low burning some N80 Coils and Poof they go bye bye... Ok back to normal and the whopping 15w
 

derrickfosgate

Gold Contributor
Member For 4 Years
dang 85w...If I recall the settings I had for TC... 70w 1 second punch 35w 460f... I only had simple Round SS316L build going on... ooh which reminds me... before I forget...need to set it back to watt mode lol

I can see me low burning some N80 Coils and Poof they go bye bye... Ok back to normal and the whopping 15w
Thats at 95 watts and its week had to bump to 105 but clouds bro clouds

Sent from my SM-G950U using Tapatalk
 

fozzy71

Silver Contributor
Member For 4 Years
Although I'm running that goon with a single coil lol

Sent from my SM-G955U using Tapatalk
ha, i built my bonza single coil today for one of my new RSQ and I am rather enjoying it, but I had to open up the air on both sides as it was too restrictive with just one side open. I did get a new Pulse 22 (and another/spare Dead Rabbit clone) today that I can build with a single coil for the RSQ so the bonza can go back to dual coil duty.

430 ss fused clapton from AVS ~0.24 ohm.



Not the best choice for testing TC mode on the RSQ as I have no clue how their TCR/XX values work. I tried '1380' (has to be a value between 700 and 8000?) and the vape was pretty anemic. I am going to throw some 316ss in the pulse 22 and see how that does in normal TC SS mode instead....... Much, much better...... now I want to rebuild the Dead Rabbit SQ with a SS coil instead of the Ni80 coil so I can switch that over to TC mode.

 

~Don~

Platinum Contributor
Member For 5 Years
@So619Cal what model is this
75dba2a97aa3c89482d64423d5709312.jpg


Sent from my SM-G950U using Tapatalk

Neo

It's almost the same as the one I have...just doesn't have the design on the door, and the script is different than the Neo Mara... Additionally it also won't have the bridge for the contacts, but still have silver plated slats and md510


Sent from my iPhone using Tapatalk
 

jcash74

Gold Contributor
Member For 5 Years
Neo

It's almost the same as the one I have...just doesn't have the design on the door, and the script is different than the Neo Mara... Additionally it also won't have the bridge for the contacts, but still have silver plated slats and md510


Sent from my iPhone using Tapatalk
I have that exact mod and it hits like a freight train!
Is that a extra ultem button? I've never been able to find any buttons for mine.
 

jcash74

Gold Contributor
Member For 5 Years
What do you guys/gals prefer 20700 or 21700 batteries?
I like to build my dual coils @.12-.18 and my single coils @.2-.25. I just bought @troydestroy s21 and don't have any batteries for it.
Any recommendations from the experts?
 

snake94115

Diamond Contributor
Member For 4 Years
So after some more bugging on my part I got Raphaël to send me a email that says he's arranged for a package pick up the 19th. Hopefully he follows through this time.

Sent from my SM-G955U using Tapatalk
Dude you are way to nice.If I were you I would've already called my bank/credit card company.
 

~Don~

Platinum Contributor
Member For 5 Years
I have that exact mod and it hits like a freight train!
Is that a extra ultem button? I've never been able to find any buttons for mine.

Bar a brume has buttons... but you can get buttons made...I think the diameter of the Neo's button is 16mm

I bought my Neo from Bar a Brume and the button at the same time.
 

BrewBear

Platinum Contributor
Member For 4 Years
Oh...Hmm!
I'd humiliate the bastard online.
Make it clear I didn't receive my win let everybody know I got scammed just totally fuck his reputation in every way I could.
His reputation is pretty :poop:y but he has his brainwashed groupies . Just wait until you get the mod, cash it in if you don't care for it and buy something you really like with the money.
 

shawn.hoefer

Gold Contributor
Member For 4 Years
I got a chance to try out the Vzone Simply Squonk mod today. Just the mod, not the RDA...

It's a little taller than the Pulse... a little narrower... about the same width.

It hits a little better than the pulse, and I like the on/off switch better. Getting to the battery and bottle is also easier (ribbon). Also, it'll work with 18650 (adapter included), 20700, and 21700.

My local B&M has 'em for $50... comes with an RSA that looks promising, if a bit wierd.
6fb0667665f1f6d636a991f72b50e611.jpg


Sent from my SAMSUNG-SM-N910A using Tapatalk
 

VU Sponsors

Top