Become a Patron!

Squonkers are Bonkers

derrickfosgate

Gold Contributor
Member For 4 Years
Im using 22 guage grinch wire and height might be a hair lower on mine
28a1a0d63daed9e7b6462eb9360a3a5b.jpg


Sent from my SM-G950U using Tapatalk
Ohming around .2 and not warm enough for me

Sent from my SM-G950U using Tapatalk
 

~Don~

Platinum Contributor
Member For 5 Years
Ohming around .2 and not warm enough for me

Sent from my SM-G950U using Tapatalk

With the above 2 pics now showing... on my computer wouldnt let me edit them out...so just added the same 2 from imgur instead...

I didn't get out today to mail those coils, but I will tomorrow... the charge didn't take on the battery so had to buy a new one. (Love Amazon same day delivery)

For that wire... do a 5 wrap with a slight spacing... remember its stainless... that .21 you're rocking jumps when heated.

That .15 Alien I made you...you're gonna like the vape of it, but hate the ramp up lol triple 24g cores uggh...but its just the first hit...once they warm its good...the fused and single wire coils wont have that issue.

That lil 2.5 alien will be a fast ramp and I think will be pretty decent...

Same with those single wire N80s I wrapped up... those will almost be insta hot
 

derrickfosgate

Gold Contributor
Member For 4 Years
U say stainless when i pulse them on my regulated the resistance does not move i now have a 5 wrap para and it .o9 a little low and fn hot 22 is the smallest wire i have
50346bb6509fda65e1e58dc5caa42b43.jpg


Sent from my SM-G950U using Tapatalk
 

derrickfosgate

Gold Contributor
Member For 4 Years
U say stainless when i pulse them on my regulated the resistance does not move i now have a 5 wrap para and it .o9 a little low and fn hot 22 is the smallest wire i have
50346bb6509fda65e1e58dc5caa42b43.jpg


Sent from my SM-G950U using Tapatalk
Para a no go burnt hits yuck

Sent from my SM-G950U using Tapatalk
 

~Don~

Platinum Contributor
Member For 5 Years
well I was going off the fused clapton cover you showed me, just assumed that the round wire you had was also ss...only wire type that hit your .16 Ohm was Stainless on Steam Engine ;)

upload_2017-12-5_17-24-33.png

Same with that coil...only thing that comes close to .09 is SS
 

~Don~

Platinum Contributor
Member For 5 Years
Either way... I'll mail those coils to you tomorrow flat rate 2 day... should have them Saturday latest. Homie needs some coils ;-) I'll spin the .2 Alien I use, I really think it will be warm enough for you...if not, remove a wrap for .16 ;)
 

derrickfosgate

Gold Contributor
Member For 4 Years
Either way... I'll mail those coils to you tomorrow flat rate 2 day... should have them Saturday latest. Homie needs some coils ;-) I'll spin the .2 Alien I use, I really think it will be warm enough for you...if not, remove a wrap for .16 ;)
Now were talkin 5 wrap 3 id little space cant remember .16 or .19 and its warm to my likeing
75b844d12711e78466772f78230d3d37.jpg


Sent from my SM-G950U using Tapatalk
 

~Don~

Platinum Contributor
Member For 5 Years
Mine might need to be a tad lower to rid the wistle are u seein my picks there all showin broke on my end

Sent from my SM-G950U using Tapatalk

The last one I saw was this one... but it said there was another picture...although only one showed up...

Edit: Also for the whistle...just slightly close the AF...should go away...I don't get the whistle unless I have it full open.

upload_2017-12-5_17-46-28.png
 

fq06

Gold Contributor
Member For 4 Years
My take on the 20700 in a mech now that I've had a couple days with it.

It barely makes it through the day, but an 18650 doesn't.

I had to tweak my build to raise the resistance 0.2 to come in at 2.2 ohms due to the lack of voltage sag from a fresh battery. 2.0 was too hot with the 20700 and liveable with the 18650.

A more energetic vape as you are getting down to 4.0 volts. Much better vape when you are getting to around 3.9-3.8v, less sag.

20700 is hanging in there at 3.7, cooler but not feeling like I need to change cells right now right now. 18650 would be coming out by 3.7v.
3.6v the 20700 is done.

I think reduced sag lends to a hotter vape throughout the entire curve and being able to run it down a little lower without your vape production falling flat.
 

~Don~

Platinum Contributor
Member For 5 Years
Hows the flav 22 af compared to phenom is it a little more or less

Sent from my SM-G950U using Tapatalk

AF is very similar...just not as finicky as the Haku ( my opinion) ... Like jmoney426... he gets whistling from his( Flave ) .. myself, train, lucy dont...similar to how I get whistling from the Haku, others don't. With the Flave I just do legs down, drop it in, center and shes rocking... Haku I need to adjust height depending on the build.

The Flave is a lot better since I bought the 510 adapter for it... out of the box you were stuck with their proprietary DTs...which almost suck as bad as the stock one on the Haku...almost ;) I used the DT from my SOI SZRDA til I bought the adapter.

Building on the 2 is similar, but the Haku has the one open side where you can swing coils in... I just remove the screw if the coils I am using cant be poked in easily on the Flave...this is a non issue with fused and single wire.

Flavor I will give the ever so slight nod to the Flave...could be placebo...but my Bourbon DIY doesn't taste as good in the Haku with the exact same build, why I am interested in obtaining a cruiser...some have noted the cruiser highlights flavors differently than the Phenom due to the deck differences...don't really know...could be a total crap shoot and I end up instead of having the Flave which my Bourbon DIY tastes really good in...end up with a Cruiser where its worse off than the Phenom lol

But back to the AF... very similar in flow and amounts available...just how it interacts due to the differences in how the AF is delivered and the actual chamber size changes the way one would perceive the vape to be...and truthfully that is very subjective.
 

derrickfosgate

Gold Contributor
Member For 4 Years
AF is very similar...just not as finicky as the Haku ( my opinion) ... Like jmoney426... he gets whistling from his( Flave ) .. myself, train, lucy dont...similar to how I get whistling from the Haku, others don't. With the Flave I just do legs down, drop it in, center and shes rocking... Haku I need to adjust height depending on the build.

The Flave is a lot better since I bought the 510 adapter for it... out of the box you were stuck with their proprietary DTs...which almost suck as bad as the stock one on the Haku...almost ;) I used the DT from my SOI SZRDA til I bought the adapter.

Building on the 2 is similar, but the Haku has the one open side where you can swing coils in... I just remove the screw if the coils I am using cant be poked in easily on the Flave...this is a non issue with fused and single wire.

Flavor I will give the ever so slight nod to the Flave...could be placebo...but my Bourbon DIY doesn't taste as good in the Haku with the exact same build, why I am interested in obtaining a cruiser...some have noted the cruiser highlights flavors differently than the Phenom due to the deck differences...don't really know...could be a total crap shoot and I end up instead of having the Flave which my Bourbon DIY tastes really good in...end up with a Cruiser where its worse off than the Phenom lol

But back to the AF... very similar in flow and amounts available...just how it interacts due to the differences in how the AF is delivered and the actual chamber size changes the way one would perceive the vape to be...and truthfully that is very subjective.
Nice write up im not that finicky of a vapor if it taste alright then its alright my palet is not strong enough to tell.unless its a hudge diff im vapein the b2k and phenom with same juice but complete diff builds and it taste almost the same lol im just not completly satisfied yet with this haku to me its another atty o well we will see in a day or so

Sent from my SM-G950U using Tapatalk
 

fq06

Gold Contributor
Member For 4 Years
Metal cap on the haku clone had a little whistle, not bad, but it was there.
Clone ultem cap has zero whistle.
 

~Don~

Platinum Contributor
Member For 5 Years
Nice write up im not that finicky of a vapor if it taste alright then its alright my palet is not strong enough to tell.unless its a hudge diff im vapein the b2k and phenom with same juice but complete diff builds and it taste almost the same lol im just not completly satisfied yet with this haku to me its another atty o well we will see in a day or so

Sent from my SM-G950U using Tapatalk

Ya know, when I first got the Haku Phenom in, I was like, "My Goodness, fuck this POS" $125 and its not even that great...still think its a $60 atty at best.

But then I started going through the gauntlet of builds and found 3 that I like... slightly spaced 6 wrap 22g N80 3mm (.28) 3mm 26x2x36 Fused N80 3mm (.29-.31) and 26x3x36 N80 3mm Alien (.21-.22)

Of all the attys I bought since switching to squonking... Flave-Haku-Flave24 have been my top 3... Didnt like the Solo, Sentinel (AF is amazing though) Armor 1.0... Goon is actually pretty good...Hoping to be pleasantly surprised with the Stumpy I got from George... will find out on Friday :D

I should buy a Goon 22 and slap a BF pin in it.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Ya know, when I first got the Haku Phenom in, I was like, "My Goodness, fuck this POS" $125 and its not even that great...still think its a $60 atty at best.

But then I started going through the gauntlet of builds and found 3 that I like... slightly spaced 6 wrap 22g N80 3mm (.28) 3mm 26x2x36 Fused N80 3mm (.29-.31) and 26x3x36 N80 3mm Alien (.21-.22)

Of all the attys I bought since switching to squonking... Flave-Haku-Flave24 have been my top 3... Didnt like the Solo, Sentinel (AF is amazing though) Armor 1.0... Goon is actually pretty good...Hoping to be pleasantly surprised with the Stumpy I got from George... will find out on Friday :D

I should buy a Goon 22 and slap a BF pin in it.

I love the Goon 22 - have several of them lol

They are a totally different atty than Flave 22 though

But Odis 16 is my absolute fave at the moment - gotta have the ultem cap though or they get hotter than a bitch
 

RSZ1

Bronze Contributor
Member For 2 Years
Member For 1 Year
My B2K developed a crunchy "post" screw. Emailed BB Vapes, within a few minutes had a tracking number for a new B2K Caviar Edition. Should arrive tomorrow.

That's what I call customer service.
 

derrickfosgate

Gold Contributor
Member For 4 Years
My B2K developed a crunchy "post" screw. Emailed BB Vapes, within a few minutes had a tracking number for a new B2K Caviar Edition. Should arrive tomorrow.

That's what I call customer service.
Theres been quit a few of these problems he is replacing mine to very straight foward guy

Sent from my SM-G950U using Tapatalk
 

Train

Gold Contributor
Member For 5 Years
I loved my Flave 22 enough to buy another. I love my Haku, and I'm getting another.

And I have two BF Goon 22's that I'd have to say are still among my favorites - I run duals in em - and I like to run duals - it lets me get extra surface area with simple wire builds...




Ya know, when I first got the Haku Phenom in, I was like, "My Goodness, fuck this POS" $125 and its not even that great...still think its a $60 atty at best.

But then I started going through the gauntlet of builds and found 3 that I like... slightly spaced 6 wrap 22g N80 3mm (.28) 3mm 26x2x36 Fused N80 3mm (.29-.31) and 26x3x36 N80 3mm Alien (.21-.22)

Of all the attys I bought since switching to squonking... Flave-Haku-Flave24 have been my top 3... Didnt like the Solo, Sentinel (AF is amazing though) Armor 1.0... Goon is actually pretty good...Hoping to be pleasantly surprised with the Stumpy I got from George... will find out on Friday :D

I should buy a Goon 22 and slap a BF pin in it.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
I loved my Flave 22 enough to buy another. I love my Haku, and I'm getting another.

And I have two BF Goon 22's that I'd have to say are still among my favorites - I run duals in em - and I like to run duals - it lets me get extra surface area with simple wire builds...

It was easier to get four Flave 22 TIs than one Haku
 

fartbubble

Silver Contributor
Member For 3 Years
Member For 2 Years
36 hours exact to get a Bellcap & 4 bottles from Birmingham UK to Wisconsin (ordered it early Sunday morning).


Now if I could find my Entheon
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
I love the Goon 22 - have several of them lol

They are a totally different atty than Flave 22 though

But Odis 16 is my absolute fave at the moment - gotta have the ultem cap though or they get hotter than a bitch
Yep I like the Goon 22 clones I have.
Not Wasps but nice.
 

jasonandsarah

Gold Contributor
Member For 3 Years
My B2K developed a crunchy "post" screw. Emailed BB Vapes, within a few minutes had a tracking number for a new B2K Caviar Edition. Should arrive tomorrow.

That's what I call customer service.
Yeah he's been hooking people up. Idk why he doesn't just send people a new positive block because everyone I've seen it was on the positive side. But Im not complaining, think I'm gonna send my SS cap out to get engraved!

Sent from my SM-G955U using Tapatalk
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
f095e05f5e68fbc2c60dd5255160df6a.jpg


Ok enough is enough from AllianceTech




Sent from my iPhone using Tapatalk

I love that the Ti version doesn’t have any engraving on it. They should keep with that across all models... that logo is really tacky IMO.


Sent from my iPhone using Tapatalk Pro
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
Good to see that you are still around Brewbear.
Hope you stuff did not get burned up.
 

troydestroy

Silver Contributor
Member For 4 Years
Why didn't you like it?

Sent from my SM-G955U using Tapatalk
I do like it. It's a great vape, and easy to build. Just like others more

Nitpicks:
-It's a little tall
-I don't like the "vikset" style ufo cap... A little busy for my taste
-White is a little translucent

figured I'd try to get my cost back out of it while still a hot item.
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
Hope you're safe Brewbear... and as minor personal belongings are in the grand scheme of these wildfires, I really hope your residence etc. are intact.

I saw a thing on weather.com that said Bel-Air has been evacuated. Maybe now that super-rich people are inconvenienced, it'll make the gov't get more serious about fire fighting. Or maybe half of the super-rich will move somewhere else and free up water resources for the rest of ya, instead of keeping it in their swimming pools. :)

Andria
 

jasonandsarah

Gold Contributor
Member For 3 Years
I do like it. It's a great vape, and easy to build. Just like others more

Nitpicks:
-It's a little tall
-I don't like the "vikset" style ufo cap... A little busy for my taste
-White is a little translucent

figured I'd try to get my cost back out of it while still a hot item.
I love being able to see through my caps and nothing's to tall for me after the Entheon. But I do get some leaking with it if it's tipped sideways at all after squonking, that's my only gripe.

Sent from my SM-G955U using Tapatalk
 

jasonandsarah

Gold Contributor
Member For 3 Years
Am I the only one that's kinda pissed off at psyclone mods for the new accessories bundles? I like it but to get what I want I'd basicly have to buy all 4 kits for a $100! Fuck that.... Why not have a wide bore set and include the rings and colored orings? Idk maybe I'm crazy(no maybe about it, but I mean about this )

Sent from my SM-G955U using Tapatalk
 

VU Sponsors

Top