Become a Patron!

Squonkers are Bonkers

Bardiel003

Silver Contributor
Member For 2 Years
Member For 1 Year
In US BroScience Vapes, ordered and received in around 2 days, a lot cheaper than ordering from U.K., I just paid more for a large positive nut from the U.K. than I did for 2 mm bf 510's because of overseas shipping.
Awesome thanks ^w^. I'm still working on measurements before printing it. The mod is going to be flat top on front, rounded in rear with a cut out opening for the bottle. All I need to measure is the hight difference and how much of a opening I'll need to make for the 510 and the distances from top to the bottle midway.
 

Train

Gold Contributor
Member For 5 Years
Woopsie. Didn't know that - they do look like a good one...was just naming "square boxes" - nothing against 'em!!
:)

Not to be contrary, but the Plug is made from machined delrin or G10 (same as the OEM Billet Box panels). I have one arriving hopefully next week :)


Sent from my iPhone using Tapatalk Pro
 

Train

Gold Contributor
Member For 5 Years
The maker of that 6ixty 7even was being really cool, putting his designs up on Sculpteo, so folks could print their own - but then people starting selling them, including some "rare" doors and such - and calling them "authentic". Amateur cloners. So he took it down...

17596175_1833474926893978_4364739499285020672_n.jpg



I'm 3d printing my own. But I see how some mods are made out of delrin and I'm thinking grabbing one Oo!
 

~Don~

Platinum Contributor
Member For 5 Years
I should just buy a Floris box and whip up a mod myself...Mod..button is all I need...Rest is EZ-PZ...Prefer Delrin boxes anyway...

I can't with good conscience ever recommend the Molly to anyone... Its a great little mod, BUT... their customer service is SHIT. Sure the box is cool, works well from the get go...but mine had a fitment issue with the factory door...Pm'd them and they were all like, Its the magnets causing the door to move... it's not...showed video and pictures of the door and they both agreed its probably the box enclosure tolerances being off...messaged video of the door having a near 1/8th inch gap on the top of the mod and Ludovic agreed to send me another box once they got supply in, which was the past few days...which today he said he would have them (Current orders etc mailed out this week ) ...have nearly 7 weeks of communication with that dude and their response was...send it back to us on our dime... I offered to pay return shipping so I wouldn't be down the mod in the transit and he agreed... We shall see...with the lack of professionalism they have, I am sure this will end up with a Paypal dispute by Thursday.

I never expected the mod to be PERFECT...but the door never sat right, ordered a stab door and it fits perfect, but I asked the guy to make it slightly taller...

Ahwell live and learn ;)
 

Bardiel003

Silver Contributor
Member For 2 Years
Member For 1 Year
The maker of that 6ixty 7even was being really cool, putting his designs up on Sculpteo, so folks could print their own - but then people starting selling them, including some "rare" doors and such - and calling them "authentic". Amateur cloners. So he took it down...

17596175_1833474926893978_4364739499285020672_n.jpg
That be actually be awesome to have a premade file and work around of it. And damn that also too bad for people who are into want to work on there own but have no experience in 3d printing lol. I'm learning as I go but with the free software I use it's kinda limited lol!
These are my designs I am working with us think tinker website. Still working on it to where I need to re measure the height and need to know the diameter of a 510 in order to fit in with some room for it. Trying not to make it too bag for room as well as not too tightly compacted in order for batter and circuit able to give off heat rather heating each other
e786ac328328aece5d24250156829a3a.jpg
f76de3cf5dd43d6fed15a7535c9f79be.jpg
 

Bardiel003

Silver Contributor
Member For 2 Years
Member For 1 Year
If you ever think of printing a front squonk mod for the FSK chip, please let me know.
New to acronyms lol fsk chip? Never heard of it. All I know for chipsets are the DNA 60 & 75. =P and I'm not to quite sure I don't own a 3d printer. But since I am a car enthusiasts and major to engineering. I know lot of friends who own one or two of them Lmao!
 

Bardiel003

Silver Contributor
Member For 2 Years
Member For 1 Year
If you ever think of printing a front squonk mod for the FSK chip, please let me know.
Saw the chip. Looks more simpler Oo! Mutha fucking shit! Unparalleled battery sled just needed and button and mod case it self.. Hmm looks doable just wondering if the bottle can still be reset faced like my idea =/ hmmmm.....
 

BrewBear

Platinum Contributor
Member For 4 Years
Saw the chip. Looks more simpler Oo! Mutha fucking shit! Unparalleled battery sled just needed and button and mod case it self.. Hmm looks doable just wondering if the bottle can still be reset faced like my idea =/ hmmmm.....
They are used in the HohmTech mods, the only chip I know of that will TC Kanthal. I have several G2 (2 18650 batts) and Slice ( single 26650/18650) and I'd have no problem taking the chip out of one of them. The dual 18650 goes to 171w, the single goes to 101w.
 

Bardiel003

Silver Contributor
Member For 2 Years
Member For 1 Year
They are used in the HohmTech mods, the only chip I know of that will TC Kanthal. I have several G2 (2 18650 batts) and Slice ( single 26650/18650) and I'd have no problem taking the chip out of one of them. The dual 18650 goes to 171w, the single goes to 101w.
Hmmm wonder how would I build it. Because my original idea for my squonk was to have 1 battery 1 bottle, slim design for button and mosfet. And that's it. But now with this as a dual 18650 and a bottle. It would maybe be like a pentagon design maybe..
 

BrewBear

Platinum Contributor
Member For 4 Years
Hmmm wonder how would I build it. Because my original idea for my squonk was to have 1 battery 1 bottle, slim design for button and mosfet. And that's it. But now with this as a dual 18650 and a bottle. It would maybe be like a pentagon design maybe..
This is a MOSFET dual battery squonk, it is very comfortable to use with either hand2017-06-10 08.27.15.jpg 2017-05-27 19.45.42.jpg 20170603_085817.jpg
 

Bardiel003

Silver Contributor
Member For 2 Years
Member For 1 Year
Like the gbox 100 design would be adequate. Batter on the sides bottle be the middle.
 

b.m.

Silver Contributor
Member For 4 Years
The maker of that 6ixty 7even was being really cool, putting his designs up on Sculpteo, so folks could print their own - but then people starting selling them, including some "rare" doors and such - and calling them "authentic". Amateur cloners. So he took it down...

17596175_1833474926893978_4364739499285020672_n.jpg
I had 2 of those v2's printed,got the files shortly before he took them down.I really like that box,i wish someone was making that goat head door for the v2's i would buy one,i keep watching on their page,but doesn't look like they will be made anymore.
 

Train

Gold Contributor
Member For 5 Years
I don't have any kind of handle on the graphics of those - which ones were special or limited, etc...or if there's meaning behind any of the "occultus" stuff. Just not my thing. I just like the shape and materials and finish, etc - particularly the Neo.
I have a second one coming...

flatblack2.jpg

I printed myself a green door, for a cheerier look, lol.
(I mean I ordered it direct from the print-shop, I don't HAVE a 3D printer...)
greenbody1sm.jpg




I had 2 of those v2's printed,got the files shortly before he took them down.I really like that box,i wish someone was making that goat head door for the v2's i would buy one,i keep watching on their page,but doesn't look like they will be made anymore.
 

~Don~

Platinum Contributor
Member For 5 Years
Let me. Know how it is. If it's legit I might buy it as well for delrin =p

I think it will be perfect honestly...I have not heard one bad thing about them from the members here who had theirs made by Saint... And it was one of the 3 I considered (Molly, Orca, 2x700 Boxer) when I was first going to get into Mech Squonkers...
 

Bardiel003

Silver Contributor
Member For 2 Years
Member For 1 Year
I think it will be perfect honestly...I have not heard one bad thing about them from the members here who had theirs made by Saint... And it was one of the 3 I considered (Molly, Orca, 2x700 Boxer) when I was first going to get into Mech Squonkers...
The r and its under 100 with tax and shipping (I hope lol)
 

Bardiel003

Silver Contributor
Member For 2 Years
Member For 1 Year
Hell now I'm thinking of sending Jim my idea for my squonk mod and have it made out if delrin =p
 

~Don~

Platinum Contributor
Member For 5 Years
The r and its under 100 with tax and shipping (I hope lol)

$53.03 USD shipped, By Description...Box, Door w/Magnets, Button...Already have the 510...Copper is cheap if I go that route ($8 on Amazon) or $22 Silver...Thinking about it, I'll probably go the Copper route since MM510 is brass/stainless and isn't the Silver Plated Mod Dog Nano...I'm a Sheet metal Installation Foreman ( HVAC ) with access to the shop to cut the contacts, or use my shears I have...Plus Copper hits hard enough...Heck the Molly Hits harder than my SOI Tube lol and that tube has Silver Contacts... Plus I needed ( wanted ) another Squonk that really fit 24mm RDAs well ( The 2x700 Orca is 25mm wide )

So Figure for a nice squonk and a little time...53+10+8 (Box, 510, Copper Sheet) $71 excluding batteries
 

Bardiel003

Silver Contributor
Member For 2 Years
Member For 1 Year
Hmm I maybe order that fsk chip and re model the mod to where : bottle, then have dual sleds all 3 line up. Shouldn't be too big in a sense and the 510 be close not far away. And battery sleds connections to the chip is pretty simple..
 

Bardiel003

Silver Contributor
Member For 2 Years
Member For 1 Year
$53.03 USD shipped, By Description...Box, Door w/Magnets, Button...Already have the 510...Copper is cheap if I go that route ($8 on Amazon) or $22 Silver...Thinking about it, I'll probably go the Copper route since MM510 is brass/stainless and isn't the Silver Plated Mod Dog Nano...I'm a Sheet metal Installation Foreman ( HVAC ) with access to the shop to cut the contacts, or use my shears I have...Plus Copper hits hard enough...Heck the Molly Hits harder than my SOI Tube lol and that tube has Silver Contacts... Plus I needed ( wanted ) another Squonk that really fit 24mm RDAs well ( The 2x700 Orca is 25mm wide )

So Figure for a nice squonk and a little time...53+10+8 (Box, 510, Copper Sheet) $71 excluding batteries
Might go with your route and also order 510 from mod maker. I see that's a legit squonk 510 connectors then here in US.
 

Sonar505

Silver Contributor
Member For 4 Years
Member For 3 Years
Modder
Does anyone else belong to Squonkers and Squonkers Exchange groups on Facebook. And know what is going on with them. Or can tell me what (Group has been Archived) means going forward?
 

BrewBear

Platinum Contributor
Member For 4 Years
Yup.

Sent from my SM-G935F using Tapatalk
That sucks for you friend, I was offering to send you a couple of pairs of coils to try out. If you wrap your own, they're pretty easy to make, shoot me a pm and I'll link you to the post where I first saw them.
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
Does anyone else belong to Squonkers and Squonkers Exchange groups on Facebook. And know what is going on with them. Or can tell me what (Group has been Archived) means going forward?
we can view it, but no longer post
 

DogMan

VU Donator
Diamond Contributor
Member For 5 Years
Ok Thanks . Did you happen to hear why it was archived?

maybe since no one used it much? all in squonkers paradise, or the squonkers paradise clone [think it is called squonkers paradise international]

all the vendors and group buys use SP
 

b.m.

Silver Contributor
Member For 4 Years
I don't have any kind of handle on the graphics of those - which ones were special or limited, etc...or if there's meaning behind any of the "occultus" stuff. Just not my thing. I just like the shape and materials and finish, etc - particularly the Neo.
I have a second one coming...

View attachment 89207

I printed myself a green door, for a cheerier look, lol.
(I mean I ordered it direct from the print-shop, I don't HAVE a 3D printer...)
View attachment 89208
Yeah,i have no idea on the meanings of the different stuff he does,but for some reason that goat head one really grabs my attention every time i see it haha.
Those Neo's are very cool,i will get one eventually.He did a diy thing on them a while back,but it was only open for a few hours and i didn't see the post until after it closed.
Here's one of the V2's i had printed,the other will be here in a few days,that one is all alumide,can't wait to check that one out.
oAP3mZe.jpg
 

Sonar505

Silver Contributor
Member For 4 Years
Member For 3 Years
Modder
Thanks Dogman new question is squonkers paradise on facebook one of those groups that require a referral to even see it. Plus you have to learn the secret handshake and dance to join?
 

Nevweezy

VU Donator
Silver Contributor
Member For 3 Years
Member For 2 Years
maybe since no one used it much? all in squonkers paradise, or the squonkers paradise clone [think it is called squonkers paradise international]

all the vendors and group buys use SP
I didnt know there was a group called Sqounkers Paridise, i thought the only two where the Sqounkers Paradise International and Sqounkers Paradise International BST. I just tried looking and cant seem to locate it.
 

Nevweezy

VU Donator
Silver Contributor
Member For 3 Years
Member For 2 Years

Bardiel003

Silver Contributor
Member For 2 Years
Member For 1 Year
I didnt know there was a group called Sqounkers Paridise, i thought the only two where the Sqounkers Paradise International and Sqounkers Paradise International BST. I just tried looking and cant seem to locate it.
Yup. I'm in the group as well. Mainly for sales and whatnot. And sometimes they talk abiut squonking like we do here lol!
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I need to buy some to make some contacts for a mod i have. So you got the LG422 which is sterling silver and not .999 fine silver correct? Does it matter that its Sterling and not pure??
Credit goes to @minimalsaint for pointing me in the right direction way back.


Sent from my iPhone using Tapatalk
I honestly couldn't tell you, I took the advice from someone I trusted and it works great; and was easy to cut and fold. I know electronics, but when it comes to metallurgy, I get lost.

BAM crew
 

SirKadly

Squonk 'em if you got 'em
VU Donator
Platinum Contributor
Member For 5 Years
Toaster mods has list up for these new V3 squonk from both sides. And no square bottles. Not on shape ways yet just doors buttons. buttons
949ea0c808e823be6da6881927c23316.jpg
c081ce87b32754574442b3d2e894aeae.jpg


Sent from my SHIELD Tablet K1 using Tapatalk
They came so close to a design I actually would have considered...
I'll stick with my Coppervapes I guess.

As Maxwell Smart would say
 

Wicked Gene

Silver Contributor
Member For 4 Years
Toaster mods has list up for these new V3 squonk from both sides. And no square bottles. Not on shape ways yet just doors buttons. buttons
949ea0c808e823be6da6881927c23316.jpg
c081ce87b32754574442b3d2e894aeae.jpg


Sent from my SHIELD Tablet K1 using Tapatalk

I own several TD's and they are great mods. The V3 is Marks newest design and the body will not be on shapeways anytime soon. The doors and buttons are available so you can customize your mod. The V3 is not available in allumide yet. Mark is an excellent designer and always at the other end of a msg to help you out with any questions, as is the TD community. If your looking for a 3d printed mod that won't break the bank, then give TD a try.
Here are a few that i own,
8b3c1fcbd720f13aa88ab1cd8fa22d07.jpg

2c26dbb8fd41120a522579a928ca0406.jpg

b1d70f26e36a3782856a80a8ab476e58.jpg

bfdffb0c2e5c14445454b85baaa9e522.jpg



Sent from my iPhone using Tapatalk Pro
 

Le Furet

VU Donator
Silver Contributor
Member For 3 Years
Member For 2 Years
Toaster mods has list up for these new V3 squonk from both sides. And no square bottles. Not on shape ways yet just doors buttons. buttons
949ea0c808e823be6da6881927c23316.jpg
c081ce87b32754574442b3d2e894aeae.jpg


Sent from my SHIELD Tablet K1 using Tapatalk

Really surprising that hardly anyone is jumping on that list. He added the older models to it too, I personally prefer the V2 classic box style, if I didn't already have 4 mods en route I'd pounce.
I've been on a bender again and need to chilllllll.... I seem to have the Midas Touch on those stupid lists!
 

Le Furet

VU Donator
Silver Contributor
Member For 3 Years
Member For 2 Years
I own several TD's and they are great mods. The V3 is Marks newest design and the body will not be on shapeways anytime soon. The doors and buttons are available so you can customize your mod. The V3 is not available in allumide yet. Mark is an excellent designer and always at the other end of a msg to help you out with any questions, as is the TD community. If your looking for a 3d printed mod that won't break the bank, then give TD a try.
Here are a few that i own,
8b3c1fcbd720f13aa88ab1cd8fa22d07.jpg

2c26dbb8fd41120a522579a928ca0406.jpg

b1d70f26e36a3782856a80a8ab476e58.jpg

bfdffb0c2e5c14445454b85baaa9e522.jpg



Sent from my iPhone using Tapatalk Pro
Nice Toaster family dude!
I really dig the door of the top one with the toast logo in the corner & the text up the side. Super clean.
 

VU Sponsors

Top