Become a Patron!

Squonkers are Bonkers

Le Furet

VU Donator
Silver Contributor
Member For 3 Years
Member For 2 Years
Hey @Proatype , you gonna have a group buy for the DPM DNA60 Li-Mo ? I mean the damn thing is worth $200 but the shipping..... and they're on FB!
Sorry man, I was being a sarcastic dick, the drip tip deal went sideways on you and I just couldn't resist!
Haa... you dick. The Great Drip Tip Group Buy Fail of 2017, mannn... well it worked out for ALMOST everybody ; ((
But that was definitely my last one!
Since then, I've received two more packages to my house ripped open just like Lucy & Gene's. So it's someone on my processing end. I filed a complaint for each.
 
Last edited:

BrewBear

Platinum Contributor
Member For 4 Years
Haa... you dick. The Great Drip Tip Group Buy Fail of 2017, mannn... well it worked out for ALMOST everybody ; ((
But that was definitely my last one!
Since then, I've received two more packages to my house ripped open just like Lucy & Train's. So it's someone on my processing end. I filed a complaint for each.
What you need to do is find the mother lover and have him chain vape (for an hour or so) your least favorite atty without a top cap!
 

~Don~

Platinum Contributor
Member For 5 Years
Anyone know the actual size of the Flaves drip tip? Or someone that makes some for it...its significantly larger than 810 lol


Sent from my iPhone using Tapatalk
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon

Le Furet

VU Donator
Silver Contributor
Member For 3 Years
Member For 2 Years
Anyone know the actual size of the Flaves drip tip? Or someone that makes some for it...its significantly larger than 810 lol


Sent from my iPhone using Tapatalk

Dunno, but I know I've seen aftermarket chuff caps for it somewhere..
 

SirVtHondaGuy08

Gold Contributor
Member For 4 Years
Are you volunteering? They are really nice mods, I think you can get them with your choice of DNA 60 or DNA 75.

Possibly, I'd have to do that math, $40 for bulk shipping/3people if that's all there is then $8 shipping from me to you could also be more depending your location


Sent from my iPhone using Tapatalk
 

BrewBear

Platinum Contributor
Member For 4 Years
Possibly, I'd have to do that math, $40 for bulk shipping/3people if that's all there is then $8 shipping from me to you could also be more depending your location


Sent from my iPhone using Tapatalk
I'm in SoCal so $8 shipping should be fine. Please let me know what you think.
 

BrewBear

Platinum Contributor
Member For 4 Years
just received a facebook message from DPM Mods. looks like my DNA60 Li-Mo is finished! i should be getting it on monday since its already a friday here in Manila. comes with Lukkos Silk bottles as standard! cant wait. :D

View attachment 89061
Love the look of that mod, would love to see one the green stab wood. Do they offer different options?
 

SirVtHondaGuy08

Gold Contributor
Member For 4 Years
I'm in SoCal so $8 shipping should be fine. Please let me know what you think.

I'll give it some thought but I'm not a fan of the wait time, that's a long time to either have my money tied up while their made or someone else's money tied up. Then if something happened it could go bad real fast


Sent from my iPhone using Tapatalk
 

antikryst

Member For 2 Years
Member For 1 Year
Love the look of that mod, would love to see one the green stab wood. Do they offer different options?
Li-Mo is 200 for the delrin version. Black delrin or white delrin. DNA 60 or DNA 75. Stab wood door is an extra 20. They made me choose from the pieces of stabwood that were available. Not sure how much the Li-Mo is in full resin or stabwood versions.

They also have the Remmus. A mech squonker. Delrin is 185. Acrylic is 210. Stabwood is 260.

Just sent them a message asking how many mods will fit in a 40 dollar 1 kg flat rate box to the US. Will update you guys when I get a response.

Sent from my SM-G935F using Tapatalk
 

antikryst

Member For 2 Years
Member For 1 Year
Love the look of that mod, would love to see one the green stab wood. Do they offer different options?
Just got that from their Facebook.
e2c242b02ef67eb8d8716098e209f311.jpg


Sent from my SM-G935F using Tapatalk
 

antikryst

Member For 2 Years
Member For 1 Year
43$ 1 kg flat rate box can fit 3 mods. 100$ downpayment per mod to include you in a batch.

Confirmed these from DPM.

Sent from my SM-G935F using Tapatalk
 

Swindler

Member For 3 Years
Member For 2 Years
Just Scored this from a Group.........The makers is a good guy and the price point is amazing (3D printed, with mod maker bottle): 70 Pounds. I am not associated nor have any vested interest....just sharing what i came across and got lucky with...I GOT THE GREEN ONE :)
 

Attachments

  • UFO MODS.jpg
    UFO MODS.jpg
    153 KB · Views: 58

antikryst

Member For 2 Years
Member For 1 Year
43$ 1 kg flat rate box can fit 3 mods. 100$ downpayment per mod to include you in a batch.

Confirmed these from DPM.

Sent from my SM-G935F using Tapatalk
Got more details for DPM Mods shipping.. to the US only.

$43 for 1 to 3 mods
$65 for 4 to 6 mods
$105 for 7 to 20 mods

Not affiliated with them but DPM is from my country. Just want to help them out.

Do I smell a group buy?

Sent from my SM-G935F using Tapatalk
 

Le Furet

VU Donator
Silver Contributor
Member For 3 Years
Member For 2 Years
Anyone know the actual size of the Flaves drip tip? Or someone that makes some for it...its significantly larger than 810 lol


Sent from my iPhone using Tapatalk

You dude, bumped into these just now. Might be kinda cool...
IMG_3029.jpg
 

CactusFanaticus

Silver Contributor
Member For 2 Years
I know, you are lucky! In mine the soldering wasn't half bad, it was ALL bad! Mine was probably made the Monday after a Chinese holiday or something.
Lol, that sucks. Luck of the draw I suppose, hopefully quality control is picking up because it seems to be a good little mod when built decent.
 

antikryst

Member For 2 Years
Member For 1 Year
Can you get a good vape on a dual coil setup for a single battery regulated squonker? Thinking of trying the coil art dpro RDA.

Any build suggestions? Not really a dual coil guy but I guess I can try any dual coil build suggestions on my hcigar maze 2.

Don't care about vapor production.. just into the flavor.

Sent from my SM-G935F using Tapatalk
 
Can you get a good vape on a dual coil setup for a single battery regulated squonker? Thinking of trying the coil art dpro RDA.

Any build suggestions? Not really a dual coil guy but I guess I can try any dual coil build suggestions on my hcigar maze 2.

Don't care about vapor production.. just into the flavor.

Sent from my SM-G935F using Tapatalk
I use 6 wraps of 24ga, 25id stainless with my pulse 22mm and it is perfection in my book. I have a goon 1.5 and still can't get a single coil better than my pulse.

Sent from my Pixel using Tapatalk
 

BrewBear

Platinum Contributor
Member For 4 Years
Can you get a good vape on a dual coil setup for a single battery regulated squonker? Thinking of trying the coil art dpro RDA.

Any build suggestions? Not really a dual coil guy but I guess I can try any dual coil build suggestions on my hcigar maze 2.

Don't care about vapor production.. just into the flavor.

Sent from my SM-G935F using Tapatalk
I use these crazy coils, they can be a PITA to install, but great flavor.2017-06-10 08.27.15.jpg 2017-06-10 08.26.28.jpg
In 28g SS wire they come out at about 0.48 ohms, in 26g they come out at about 0.3 ohms. I use them in dual configuration on pretty much all my squonk mods, they are single battery regulated (DNA 75 or kangers)
 
Last edited:

SteelDriver

Gold Contributor
Member For 4 Years
Can you get a good vape on a dual coil setup for a single battery regulated squonker? Thinking of trying the coil art dpro RDA.

Any build suggestions? Not really a dual coil guy but I guess I can try any dual coil build suggestions on my hcigar maze 2.

Don't care about vapor production.. just into the flavor.

Sent from my SM-G935F using Tapatalk
Dpro is dual coil I've tried single and naaa. If you want single get a rda designed for it is what I'm learning in this 5 new rdas coming out every week world.

Sent from my SHIELD Tablet K1 using Tapatalk
 

CrazyChef v2.0

Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Okay, so I'm new to this thread - WOW, what a lot to read through!

So a question for the squonking aficionados: What would you consider to be the 5 best squonk mods out there? Obviously this is a subjective question, but I'm just curious. Of the few squonk boxes I've tried, only the Wraith seems comfortable to use. There must be others on a higher quality level that are as ergonomically comfortable as the Wraith. One that looks interesting is the Therion, but I don't really need the DNA chip capabilities. Preferably mech squonkers.

Oh yeah - I don't use the RDA that came with the Wraith - I use a CSMNT with bf assembly.
 

~Don~

Platinum Contributor
Member For 5 Years
You dude, bumped into these just now. Might be kinda cool...
View attachment 89168

Thanks for looking out; I saw those... Out of Stock :| I'll probably go about and have someone make a custom wide bore to fit the flave for me...most likely Lawless DT's again.


EDIT: Got Word from Lawless Drip Tips...He can make them...Will be nice to have a Goon height width DT for the Flave...As much as I enjoy the smaller flavor RDAs, I fucking hate every DT that comes with them lol
 
Last edited:

SteelDriver

Gold Contributor
Member For 4 Years
Okay, so I'm new to this thread - WOW, what a lot to read through!

So a question for the squonking aficionados: What would you consider to be the 5 best squonk mods out there? Obviously this is a subjective question, but I'm just curious. Of the few squonk boxes I've tried, only the Wraith seems comfortable to use. There must be others on a higher quality level that are as ergonomically comfortable as the Wraith. One that looks interesting is the Therion, but I don't really need the DNA chip capabilities. Preferably mech squonkers.

Oh yeah - I don't use the RDA that came with the Wraith - I use a CSMNT with bf assembly.
Alot like the coppervape mechs. I have a little orca that I absolutely love. I think I'm ordering a boxer bf classic next week but keep watching the toaster stuff and thinking about making one of those myself. I have a vt inbox and therion. Vt gets used but therion sits just like the inbox better for some reason.


Sent from my SHIELD Tablet K1 using Tapatalk
 

antikryst

Member For 2 Years
Member For 1 Year
I use these crazy coils, they can be a PITA to install, but great flavor.View attachment 89186 View attachment 89187
In 28g SS wire they come out at about 0.48 ohms, in 26g they come out at about 0.3 ohms. I use them in dual configuration on pretty much all my squonk mods, they are single battery regulated (DNA 75 or kangers)
Damn. I don't think I can wrap like that.

Sent from my SM-G935F using Tapatalk
 

~Don~

Platinum Contributor
Member For 5 Years
keep watching the toaster stuff and thinking about making one of those myself.


Sent from my SHIELD Tablet K1 using Tapatalk


I am thinking the same...Just not sure which one...well I am able to eliminate a few...all that use the Soy bottles...Shame the TD25 uses the Soy...Probably end up with the 20700 or the TDSS. $58 for the Enclosure/Door/button $8 for the MM510 (Although I think the MDNano16 will fit also, this would allow for the larger 8ml bottles since they are shorter) ..and a Sheet of half hard silver to make the contacts should be about $18-$25.
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
I am thinking the same...Just not sure which one...well I am able to eliminate a few...all that use the Soy bottles...Shame the TD25 uses the Soy...Probably end up with the 20700 or the TDSS. $58 for the Enclosure/Door/button $8 for the MM510 (Although I think the MDNano16 will fit also, this would allow for the larger 8ml bottles since they are shorter) ..and a Sheet of half hard silver to make the contacts should be about $18-$25.

T3 Mods on FB has a BNB (built not bought) option for $55 with shipping IIRC. Very solid enclosures with TONS of color and door style options. Slightly less expensive and less generic looking than the Toaster IMHO.


Sent from my iPhone using Tapatalk Pro
 

CactusFanaticus

Silver Contributor
Member For 2 Years
I am thinking the same...Just not sure which one...well I am able to eliminate a few...all that use the Soy bottles...Shame the TD25 uses the Soy...Probably end up with the 20700 or the TDSS. $58 for the Enclosure/Door/button $8 for the MM510 (Although I think the MDNano16 will fit also, this would allow for the larger 8ml bottles since they are shorter) ..and a Sheet of half hard silver to make the contacts should be about $18-$25.
I went with the SS, I have a hunch that the boxer contacts may fit and work great, making the process much simpler, just ordered a set from ginger vape. Will be using a large positive nut on the MM510 so they don't have to be bent. I hope they do, love those contacts. Worse case I have a spare set for my boxer.
 

SteelDriver

Gold Contributor
Member For 4 Years
I am thinking the same...Just not sure which one...well I am able to eliminate a few...all that use the Soy bottles...Shame the TD25 uses the Soy...Probably end up with the 20700 or the TDSS. $58 for the Enclosure/Door/button $8 for the MM510 (Although I think the MDNano16 will fit also, this would allow for the larger 8ml bottles since they are shorter) ..and a Sheet of half hard silver to make the contacts should be about $18-$25.
Supposed to be a V3 coming out today that is rounded on one side looks like boxer. I like boxer for locking without opening batt compartment.


Sent from my SHIELD Tablet K1 using Tapatalk
 

Bardiel003

Silver Contributor
Member For 2 Years
Member For 1 Year
Sorry if this is asked already. But does anyone know a legit site to order bf 510? Was just about to order fat daddy v4 off from ebay but then someone bought thr last one =/. I have a battery sled mosfet e/ resistor, a led push button, just need now the connector, solder everything and fit in the box lol
 

BrewBear

Platinum Contributor
Member For 4 Years
Sorry if this is asked already. But does anyone know a legit site to order bf 510? Was just about to order fat daddy v4 off from ebay but then someone bought thr last one =/. I have a battery sled mosfet e/ resistor, a led push button, just need now the connector, solder everything and fit in the box lol
You can order directly from Fat Daddy or someone here will point you to US sites.
 

BrewBear

Platinum Contributor
Member For 4 Years
I am thinking the same...Just not sure which one...well I am able to eliminate a few...all that use the Soy bottles...Shame the TD25 uses the Soy...Probably end up with the 20700 or the TDSS. $58 for the Enclosure/Door/button $8 for the MM510 (Although I think the MDNano16 will fit also, this would allow for the larger 8ml bottles since they are shorter) ..and a Sheet of half hard silver to make the contacts should be about $18-$25.
FT and 3F have the square silicone bottles now.
 

~Don~

Platinum Contributor
Member For 5 Years
Supposed to be a V3 coming out today that is rounded on one side looks like boxer. I like boxer for locking without opening batt compartment.


Sent from my SHIELD Tablet K1 using Tapatalk

Yeah I'm in that group...nice design...just no panels to be made for it outside of their own...

FT and 3F have the square silicone bottles now.

Indeed...although they are wider than the Soy Squares.. and get squished in his mods...

T3 Mods on FB has a BNB (built not bought) option for $55 with shipping IIRC. Very solid enclosures with TONS of color and door style options. Slightly less expensive and less generic looking than the Toaster IMHO.


Sent from my iPhone using Tapatalk Pro

Hmm I'll have to look at their mods again...part of their group also...ty
 

Train

Gold Contributor
Member For 5 Years
Best???
It's a box holding a bottle/battery/switch...so "best" is gonna be dramatically different depending what YOU LIKE.
Do you want a work of art carved from rare wood and polished by hand for a week til it glows? Cuz those are nice mods!!


If I had to pick ONLY FIVE mech squonkers (lol) I'd at least consider these:
  • Reo. Probably a P67. Not the tiniest, but great in hand, and ROCK SOLID reliable.
  • Orca. That smooth curved-edge delrin. It's like holding a bar of soap, lol. Comfy. Want it built, could check with @minimalsaint to see if he's got any
  • Coppervape. Yeah, it's like $30, but it works as well as most $150 mods
  • 6ixty 7even. I love the Neo, which is kinda curvy on one side, but they make a nice box-box, too. First printed mod I love. Facebk group to buy, but not too crazy - mods go up for sale in batches, plus a couple here and there all the time
  • Molly. Another interesting "box", it's like "brushed Delrin", and a bit more angular. Most saturdays, there's a batch for sale on a website (high-creek.ch). Can also track facebook group to know for sure when a batch is going up for sale.

There's there's some I really want but don't have: HALF; Thir13en Mech; Limelight Freehand or Gloom...And the craftsman wood ones, like the PDib Pinch, or StudioVape's work.

No way I could say any of them were the "Best - but they're a few of my favorites.

I like variety and I'm not a huge fan of the "small as we can make it printed box with a logo" - but there will be plenty of people who'd vote for those - from Frankies and Peons to Plugs and Tiny Fucker's... It depends, like I said, on what YOU like!!

nineteen-chessbd.jpg







Okay, so I'm new to this thread - WOW, what a lot to read through!

So a question for the squonking aficionados: What would you consider to be the 5 best squonk mods out there? Obviously this is a subjective question, but I'm just curious. Of the few squonk boxes I've tried, only the Wraith seems comfortable to use. There must be others on a higher quality level that are as ergonomically comfortable as the Wraith. One that looks interesting is the Therion, but I don't really need the DNA chip capabilities. Preferably mech squonkers.

Oh yeah - I don't use the RDA that came with the Wraith - I use a CSMNT with bf assembly.
 

Bardiel003

Silver Contributor
Member For 2 Years
Member For 1 Year
Best???
It's a box holding a bottle/battery/switch...so "best" is gonna be dramatically different depending what YOU LIKE.
Do you want a work of art carved from rare wood and polished by hand for a week til it glows? Cuz those are nice mods!!


If I had to pick ONLY FIVE mech squonkers (lol) I'd at least consider these:
  • Reo. Probably a P67. Not the tiniest, but great in hand, and ROCK SOLID reliable.
  • Orca. That smooth curved-edge delrin. It's like holding a bar of soap, lol. Comfy. Want it built, could check with @minimalsaint to see if he's got any
  • Coppervape. Yeah, it's like $30, but it works as well as most $150 mods
  • 6ixty 7even. I love the Neo, which is kinda curvy on one side, but they make a nice box-box, too. First printed mod I love. Facebk group to buy, but not too crazy - mods go up for sale in batches, plus a couple here and there all the time
  • Molly. Another interesting "box", it's like "brushed Delrin", and a bit more angular. Most saturdays, there's a batch for sale on a website (high-creek.ch). Can also track facebook group to know for sure when a batch is going up for sale.

There's there's some I really want but don't have: HALF; Thir13en Mech; Limelight Freehand or Gloom...And the craftsman wood ones, like the PDib Pinch, or StudioVape's work.

No way I could say any of them were the "Best - but they're a few of my favorites.

I like variety and I'm not a huge fan of the "small as we can make it printed box with a logo" - but there will be plenty of people who'd vote for those - from Frankies and Peons to Plugs and Tiny Fucker's... It depends, like I said, on what YOU like!!

View attachment 89194
I'm 3d printing my own. But I see how some mods are made out of delrin and I'm thinking grabbing one Oo!
 

~Don~

Platinum Contributor
Member For 5 Years
Sean Maddox also makes doors for them
You're welcome!




Sent from my iPhone using Tapatalk Pro

Maddox makes doors for the Toaster Design v3?

upload_2017-8-12_9-44-34.png
upload_2017-8-12_9-45-32.png

I know he makes doors for other mods, just didn't think he'd have one for the TD-V3 yet lol
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
Best???
It's a box holding a bottle/battery/switch...so "best" is gonna be dramatically different depending what YOU LIKE.
Do you want a work of art carved from rare wood and polished by hand for a week til it glows? Cuz those are nice mods!!


If I had to pick ONLY FIVE mech squonkers (lol) I'd at least consider these:
  • Reo. Probably a P67. Not the tiniest, but great in hand, and ROCK SOLID reliable.
  • Orca. That smooth curved-edge delrin. It's like holding a bar of soap, lol. Comfy. Want it built, could check with @minimalsaint to see if he's got any
  • Coppervape. Yeah, it's like $30, but it works as well as most $150 mods
  • 6ixty 7even. I love the Neo, which is kinda curvy on one side, but they make a nice box-box, too. First printed mod I love. Facebk group to buy, but not too crazy - mods go up for sale in batches, plus a couple here and there all the time
  • Molly. Another interesting "box", it's like "brushed Delrin", and a bit more angular. Most saturdays, there's a batch for sale on a website (high-creek.ch). Can also track facebook group to know for sure when a batch is going up for sale.

There's there's some I really want but don't have: HALF; Thir13en Mech; Limelight Freehand or Gloom...And the craftsman wood ones, like the PDib Pinch, or StudioVape's work.

No way I could say any of them were the "Best - but they're a few of my favorites.

I like variety and I'm not a huge fan of the "small as we can make it printed box with a logo" - but there will be plenty of people who'd vote for those - from Frankies and Peons to Plugs and Tiny Fucker's... It depends, like I said, on what YOU like!!

View attachment 89194

Not to be contrary, but the Plug is made from machined delrin or G10 (same as the OEM Billet Box panels). I have one arriving hopefully next week :)


Sent from my iPhone using Tapatalk Pro
 

CactusFanaticus

Silver Contributor
Member For 2 Years
Sorry if this is asked already. But does anyone know a legit site to order bf 510? Was just about to order fat daddy v4 off from ebay but then someone bought thr last one =/. I have a battery sled mosfet e/ resistor, a led push button, just need now the connector, solder everything and fit in the box lol
In US BroScience Vapes, ordered and received in around 2 days, a lot cheaper than ordering from U.K., I just paid more for a large positive nut from the U.K. than I did for 2 mm bf 510's because of overseas shipping.
 

VU Sponsors

Top