Become a Patron!

Tank won't screw into the mod

Yeh.zak1

Member For 3 Years
Hey
I bought a kayfun v3 mini sxk clone and a battlestar mod
The problem is whenever i try to screw the tank into the mod it does not fit in there
It's like either the the mod is too wide for the tank or the pin of the mod extends too high so the threads of the tank don't catch up with it.
I don't really know what is the reason for this
I tried to screw the tank in g priv mod and it fit in nicely
So what is the reason for this how could i fix it ?
 

Mike H.

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
The kayfun may have an adjustable 510 pin...if it does you may want to try adjusting that..What you want is the center pin just sticking out past the threads of the tank..
 

Yeh.zak1

Member For 3 Years
The kayfun may have an adjustable 510 pin...if it does you may want to try adjusting that..What you want is the center pin just sticking out past the threads of the tank..
I screwed the pin all the way that it cant be screwed anymore but still protruding and have this issue
 

Mike H.

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Unless the 510 on the mod is adjustable manually im not sure what else it could be...My only other thoughts would be a bad batch of clones for the tank or the 510 on the mod itself..They should both be 510 in size and work together.

Can you post some pics of the 510 on the mod and on the tank?
 

youcantsee

Member For 2 Years
Member For 1 Year
The Battlestar seems to have a further distance before the threads catch, try pushing down a little bit harder while screwing it in.

Sent from my FRD-L04 using Tapatalk
 

Yeh.zak1

Member For 3 Years
The Battlestar seems to have a further distance before the threads catch, try pushing down a little bit harder while screwing it in.

Sent from my FRD-L04 using Tapatalk

I tried to push and it worked...but when i un-screw the tank the 510 connector of the mod pushes outward with a sound and i find that the 510 paint is scratched
Would that be of any harm for the 510 on the long term ? I mean should i use it as it is or refund ?
 

youcantsee

Member For 2 Years
Member For 1 Year
I tried to push and it worked...but when i un-screw the tank the 510 connector of the mod pushes outward with a sound and i find that the 510 paint is scratched
Would that be of any harm for the 510 on the long term ? I mean should i use it as it is or refund ?
Sorry for the late response, if the 510 moves when unscrewing then I would return it. Where did you order from??

Sent from my FRD-L04 using Tapatalk
 

VU Sponsors

Top