Recoil RDA mech build.

[Kyle M.]

I haven’t vaped a mech mod since 2016 but I just dug some of my old stuff out and want to mess around. What would be a good dual coil build for an RDA with a mech? The recoil is my favorite RDA so I’d like to try it first. Unfortunately I only have 22 and 24 gauge kanthal.

 

[PortOhmReader]

take a 16 inch long piece of 24 gauge kanthal. fold it in half around a hook then twist it until its one uniform 8 inch long piece of twisted wire. then cut that in half and wrap each one around a 3mm coil jig. 5 wraps will give you 0.24 per coil 6 wraps will give you 0.28 per coil. so .12 and .14 in dual respectively

 

[Kyle M.]

take a 16 inch long piece of 24 gauge kanthal. fold it in half around a hook then twist it until its one uniform 8 inch long piece of twisted wire. then cut that in half and wrap each one around a 3mm coil jig. 5 wraps will give you 0.24 per coil 6 wraps will give you 0.28 per coil. so .12 and .14 in dual respectively

Thanks. I forgot about twisted wire

 

[STX]

Wire wizard | Steam Engine | free vaping calculators

Build your wire from the ground up. Combine materials, twist, clapton, go crazy. Detailed results including TCR, equivalents for Ni200 mods, and CSV export.

www.steam-engine.org